Home > Exhibition > Content
Inspection before installation of the torque coupler for the hydraulic coupler.
Jan 11, 2018

With the development and progress of the society, the torque coupler is widely used.

The relevant knowledge of the limited moment coupler is also being noticed by more and more consumers. The following is a brief introduction to the pre-installation inspection of the moment coupler.

Limited moment coupler before installation should check for assembling of motor shaft, coupler input shaft and output shaft hole (or reducer shaft), work machine shaft trunnion, slotting, shaft extension and coupler length is in accordance with the requirements.

Remove burrs and repair damaged surfaces.

The coupling of the coupler shaft with the motor shaft and the reducer shaft is recommended to select the clearance fit with the smaller clearance, and the selection of the transition fit can also be used, but it is not possible to choose the interference fit.

Need to know about his trunnion when buying limited moment coupler and key is high, the key width must be size, cooperate with prime mover and work machine shaft hole of the tolerances recommended users using the G7 tolerance, such as not specifically noted will be effected according to the datum hole tolerance H7 treatment.

Hydraulic coupler spare parts.