Home > News > Content
How To Reduce The Hydraulic Coupler Slip Rate?
Oct 13, 2017

    Xinxiang City Xinsheng Mine Manufacturing Co.,Ltd. mainly produces hydraulic coupler, friction hydraulic coupler, speed hydraulic coupler, torque-type hydraulic coupler, welcomed the new and old customers to negotiate! Xinxiang City Xinsheng mine Manufacturing Co.,Ltd with the Xiaobian analysis with you to reduce the hydraulic coupler slip rate:

    The first method is to transform the hydraulic coupler to reduce the transmission ratio of the hydraulic coupler, so that the speed of the pump wheel can be reduced so that the speed of the output of the hydraulic coupler is the same as that of the feed pump at full load The working speed is close, so as to achieve the purpose of reducing the hydraulic coupler slip rate.

    The second method is to hydraulic coupler feed pump impeller turning, reducing the feed pump at the original working speed of the pressure head and flow. When the need to achieve the original pressure and flow conditions, it is necessary to improve the feed pump (heat pump) working speed, so as to achieve the purpose of reducing the hydraulic coupler slip rate.

    The first method is to invest more, the risk is higher, but can accurately calculate the operating parameters of the pump after the transformation. The second method of investment is small, the risk is low, but the exact calculation is more difficult. After a comprehensive comparison, we finally chose to invest less, the lower risk of the second program, that is, the pump impeller for turning.