Home > News > Content
Low-Speed Hydraulic Coupling for Belt Conveyor (YNRQD-350)
Dec 28, 2017

Conveyor on the hydraulic coupler application:

(1) In order to solve the problem of light-load start-up long-distance overhead conveyors start more difficult, and suddenly start easily damaged chain. With a fluid coupling drive, you can start slowly and flexibly to protect the motor and chain from damage during start-up.

(2) Coordination of multi-power machine balanced drive single-chain multi-drive station hanging conveyor, if the drive motor speed is inconsistent, there will be a loose section of the chain a tight phenomenon, there may be serious chain "uphill." After the installation of hydraulic coupling, to solve the multi-machine drive, balanced load and synchronization problems, so that the chain is elastic, running well, reducing the failure rate. Double-Chain Suspension Conveyor Just like the gantry crane, the conveyor chains on both sides should be synchronized or skewed. In severe cases, the machine may also be damaged. After the use of hydraulic coupling drive, by adjusting the liquid volume, the two transmission chain basically synchronized to avoid failure.

(3) Of particular note is the coupling on the conveyor must be carefully selected, the best brake wheel, so as to avoid the normal operation of the situation, to stop the coupling when the situation stopped Ability to increase.